Welcome to Zhejiang KinTN Electric Co., Ltd.
E-mail: qliu@kintn.com / 1697267998@qq.com
Causes and Solutions of Industrial Touch Screen Failure
Release time:
2023-12-26
Industrial touch screen is a kind of input device widely used in the field of industrial automation control, but it may be touch failure in the working process. The following are some common industrial touch screen failure causes and solutions:
Industrial touch screen is a kind of input device widely used in the field of industrial automation control, but it may be touch failure in the working process. The following are some common industrial touch screen failure causes and solutions:
The surface of the touch screen is dirty: the surface of the touch screen that is often used is easily stained with dust, dirt, oil, etc., and it is not cleaned for a long time, which leads to insensitive touch operation and even loss of touch function. The solution is to clean the touch screen surface frequently. It is recommended to use professional cleaners and rags or sponges for cleaning, or ask a professional service engineer for cleaning and maintenance.
Touch screen driver problem: If the touch screen driver is disturbed by virus infection or accidental deletion, it will cause the touch function to fail. The solution is to reinstall the driver or upgrade the operating system software to ensure the integrity and stability of the system and drivers.
Poor touch screen connection: The touch screen is poorly connected to the computer host, and there is a problem with the transmission of touch operation signals. The solution is to check whether the cable connecting the touch screen and the host is in good contact and stable, to ensure that the cable is not worn or damaged, and to replace the cable in time if abnormal conditions are found.
Touch screen hardware failure: touch screen hardware failure will lead to touch failure or display screen, splash screen, etc. The solution is to replace or repair the hardware components of the touch screen.
Environmental interference: There are electromagnetic interference and other factors in the surrounding environment of the touch screen, which causes the touch signal to be affected by interference, making the touch insensitive or malfunction. The solution is to keep the touch screen away from the interference source, or set up a shielding grid or isolation board around the touch screen to reduce the impact of interference.
In short, the correct use and maintenance of industrial touch screens can reduce the occurrence of failures and ensure the smooth progress of the production process. If the touch screen is found to be out of order, the fault should be checked and repaired in time. It is recommended that professional staff and manufacturers handle and repair.
